Operation Manual

10
Identification of parts
1. Safety switch
2. Activation handle
3. Handle-lock
4. Upper handle
5. Lower handle
6. Grass box
7. Cable holder
8. Carrying handle
9. Engine
10. Wheels
Assembly
Fit the handle to the machine body as shown in the pictures.
Lower handlebar should be fixed to the brackets on the machine. The plastic cover is fitted
outside. Add the washer and then the handle-lock bolt.
The handle-lock kan be folded in, but be careful not to overtight it before pressing it in.
After pressed into position, it is recommende to tight the bolt further by turning it around in
closes position.
Fit the upper handle to the lower handle using the supplied handle-lock boltes, as shown
on the pictures below (remember to add the cable hook first).