Datasheet

XIO2213B
www.ti.com SCPS210F –OCTOBER 2008–REVISED MAY 2013
4.4 Status Register
The status register provides information about the PCIe interface to the system. See Table 4-3 for a
complete description of the register contents.
PCI register offset: 06h
Register type: Read only, Read/Clear
Default value: 0010h
BIT NUMBER 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RESET STATE 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0
Table 4-3. Status Register Description
BIT FIELD NAME ACCESS DESCRIPTION
15 PAR_ERR RCU Detected parity error. This bit is set when the PCIe interface receives a poisoned TLP. This
bit is set regardless of the state of bit 6 (PERR_ENB) in the command register (offset 04h,
see Section 4.3).
0 = No parity error detected
1 = Parity error detected
14 SYS_ERR RCU Signaled system error. This bit is set when the bridge sends an ERR_FATAL or
ERR_NONFATAL message and bit 8 (SERR_ENB) in the command register (offset 04h,
see Section 4.3) is set.
0 = No error signaled
1 = ERR_FATAL or ERR_NONFATAL signaled
13 MABORT RCU Received master abort. This bit is set when the PCIe interface of the bridge receives a
completion-with-unsupported-request status.
0 = Unsupported request not received on the PCIe interface
1 = Unsupported request received on the PCIe interface
12 TABORT_REC RCUT Received target abort. This bit is set when the PCIe interface of the bridge receives a
completion-with-completer-abort status.
0 = Completer abort not received on the PCIe interface
1 = Completer abort received on the PCIe interface
11 TABORT_SIG RCUT Signaled target abort. This bit is set when the PCIe interface completes a request with
completer abort status.
0 = Completer abort not signaled on the PCIe interface
1 = Completer abort signaled on the PCIe interface
10:9 PCI_SPEED R DEVSEL timing. These bits are read-only 00b, because they do not apply to PCIe.
8 DATAPAR RCU Master data parity error. This bit is set if bit 6 (PERR_ENB) in the command register (offset
04h, see Section 4.3) is set and the bridge receives a completion with data marked as
poisoned on the PCIe interface or poisons a write request received on the PCIe interface.
0 = No uncorrectable data error detected on the primary interface
1 = Uncorrectable data error detected on the primary interface
7 FBB_CAP R Fast back-to-back capable. This bit does not have a meaningful context for a PCIe device
and is hardwired to 0b.
6 RSVD R Reserved. Returns 0b when read.
5 66MHZ R 66-MHz capable. This bit does not have a meaningful context for a PCIe device and is
hardwired to 0b.
4 CAPLIST R Capabilities list. This bit returns 1b when read, indicating that the bridge supports additional
PCI capabilities.
3 INT_STATUS R Interrupt status. This bit reflects the interrupt status of the function. This bit is read-only 0b
since the bridge does not generate any interrupts internally.
2:0 RSVD R Reserved. Returns 000b when read.
Copyright © 2008–2013, Texas Instruments Incorporated Classic PCI Configuration Space 51
Submit Documentation Feedback
Product Folder Links: XIO2213B