Datasheet

XIO2213B
www.ti.com
SCPS210F OCTOBER 2008REVISED MAY 2013
8.2 GUID ROM Register
The GUID ROM register accesses the serial EEPROM, and is only applicable if bit 24 (GUID_ROM) in the
OHCI version register at OHCI offset 00h (see Section 8.1) is set to 1b. See Table 8-3 for a complete
description of the register contents.
OHCI register offset: 04h
Register type: Read/Set/Update, Read/Update, Read only
Default value: 00XX 0000h
BIT NUMBER 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RESET STATE 0 0 0 0 0 0 0 0 X X X X X X X X
BIT NUMBER 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RESET STATE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Table 8-3. GUID ROM Register Description
BIT FIELD NAME TYPE DESCRIPTION
31 addrReset RSU Software sets bit 31 to 1b to reset the GUID ROM address to 0. When the controller
completes the reset, it clears this bit. The controller does not automatically fill bits 23-16
(rdData field) with the 0 byte.
30-26 RSVD R Reserved. Bits 30-26 return 00 0000b when read.
25 rdStart RSU A read of the currently addressed byte is started when bit 25 is set to 1b. This bit is
automatically cleared when the controller completes the read of the currently addressed
GUID ROM byte.
24 RSVD R Reserved. Bit 24 returns 0b when read.
23-16 rdData RU This field contains the data read from the GUID ROM.
15-8 RSVD R Reserved. Bits 15-8 return 00h when read.
7-0 miniROM R The miniROM field defaults to 00h indicating that no miniROM is implemented. If an
EEPROM is implemented, all eight bits of this miniROM field are downloaded from
EEPROM word offset 28h. For this device, the miniROM field must be greater than 39h to
indicate a valid miniROM offset into the EEPROM.
Copyright © 2008–2013, Texas Instruments Incorporated 1394 OHCI Memory-Mapped Register Space 135
Submit Documentation Feedback
Product Folder Links: XIO2213B