Datasheet

Memory-Mapped TI Proprietary Register Space
108
March 5 2007 − June 2011SCPS154C
6.17 GPIO Control Register
This register controls the direction of the eight GPIO terminals. This register has no effect on the behavior of
GPIO terminals that are enabled to perform secondary functions. The secondary functions share GPIO4
(SCL) and GPIO5 (SDA). This register is an alias of the GPIO control register in the classic PCI configuration
space(offset B4h, see Section 4.59). See Table 6−8 for a complete description of the register contents.
Device control memory window register offset: 40h
Register type: Read-only, Read/Write
Default value: 0000h
BIT NUMBER 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RESET STATE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Table 6−8. GPIO Control Register Description
BIT FIELD NAME ACCESS DESCRIPTION
15:8 RSVD R Reserved. Returns 00h when read.
7† GPIO7_DIR RW
GPIO 7 data direction. This bit selects whether GPIO7 is in input or output mode.
0 = Input (default)
1 = Output
6† GPIO6_DIR RW
GPIO 6 data direction. This bit selects whether GPIO6 is in input or output mode.
0 = Input (default)
1 = Output
5† GPIO5_DIR RW
GPIO 5 data direction. This bit selects whether GPIO5 is in input or output mode.
0 = Input (default)
1 = Output
4† GPIO4_DIR RW
GPIO 4 data direction. This bit selects whether GPIO4 is in input or output mode.
0 = Input (default)
1 = Output
3† GPIO3_DIR RW
GPIO 3 data direction. This bit selects whether GPIO3 is in input or output mode.
0 = Input (default)
1 = Output
2† GPIO2_DIR RW
GPIO 2 data direction. This bit selects whether GPIO2 is in input or output mode.
0 = Input (default)
1 = Output
1† GPIO1_DIR RW
GPIO 1 data direction. This bit selects whether GPIO1 is in input or output mode.
0 = Input (default)
1 = Output
0† GPIO0_DIR RW
GPIO 0 data direction. This bit selects whether GPIO0 is in input or output mode.
0 = Input (default)
1 = Output
†
These bits are reset by a PCI Express reset (PERST), a GRST, or the internally-generated power-on reset.
Not Recommended for New Designs