Datasheet

Electrical Characteristics
12
June 2006 Revised August 2011SLLS690C
3 Electrical Characteristics
3.1 Absolute Maximum Ratings
†
Supply voltage range: 3.3 V Supply −0.5 V to 3.6 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.8 V Supply −0.5 V to 1.95 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.5 V Supply −0.5 V to 1.65 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, V
I
: PCI Express (RX) –0.6 V to 0.6 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
V
I
: PCI Express REFCLK (single-ended) –0.5 V to V
DDA_33
+ 0.5 V. . . . . . . . . . .
V
I
: PCI Express REFCLK (differential) –0.5 V toV
DD_15
+ 0.5 V. . . . . . . . . . . . . . .
Input clamp current, (V
I
< 0 or V
I
> V
DD
) (see Note 1) ±20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output clamp current, (V
O
< 0 or V
O
> V
DD
) (see Note 2) ±20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Human body model (HBM) ESD performance 1500 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Charged device model (CDM) ESD performance 500 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
stg
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Applies for external input and bidirectional buffers. V
I
< 0 or V
I
> V
DD
.
2. Applies to external output and bidirectional buffers. V
O
< 0 or V
O
> V
DD
.
3.1.1 Current Consumption
MODE TX RX VDDIO VDD15 VDD33 UNITS
L0 on on 89 102 5.4 mA
idle on 89 81 1.3 mA
L0s
on idle 66 93 4.3 mA
idle idle 66 72 1.3 mA
on idle 66 94 4.3 mA
L1
idle idle 65 72 1.3 mA
L1_sleep 75 10 1.3 mA
3.2 Recommended Operating Conditions
OPERATION MIN NOM MAX UNIT
V
DD_15
V
DDA_15
Supply voltage 1.5 V 1.35 1.5 1.65 V
V
DD_15_CORE
Supply voltage
1.5 V
1.35
1.5
1.65
V
V
DDA_33
Supply voltage 3.3 V 3 3.3 3.6 V
V
DD_IO
(1.5 V) Supply voltage (I/O) 1.5V 1.35 1.5 1.65 V
V
DD_IO
(1.8 V) Supply voltage (I/O) 1.8V 1.65 1.8 1.95 V
T
A
Operating ambient temperature range 0 25 70 °C
T
J
Virtual junction temperature (Note 3) 0 25 115 °C
NOTES: 3. The junction temperature reflects simulated conditions. The customer is responsible for verifying junction temperature.
NOTE: The TI−PIPE interface can operate either at 1.5 V or 1.8 V, depending on the voltage level of V
DD_IO
. If V
DD_IO
is 1.5 V, the TI−PIPE
interface operates at 1.5 V level. If V
DD_IO
is 1.8 V, the TI−PIPE interface operates at 1.8 V level.