User's Guide

CHAPTER2
USING YOUR CAPTURE BOARD
21 smarttech.com/kb/170769
3. If you’re using an Apple mobile device, press
Edit.
OR
If you’re using an Android mobile device, press
Menu , and then select Select.
4. Select the session you want to delete.
5.
Press
Delete , and then press OK.
Saving snapshots of your notes to a USB drive
If you don’t have access to a mobile device or would prefer to save snapshots of your notes using
another means, you can save PDF snapshots to a FAT-formatted USB drive.
To save a snapshot
1. Connect the USB drive to the USB 2.0 Type-A receptacle on the side of your capture board.
2.
Press
Capture or USB on your capture board.
The capture board saves a snapshot of your notes to the USB drive.
3. Disconnect the USB drive from your capture board when you’re done saving snapshots.
Accessing capture board diagnostic information
The SMARTkapp app provides the following information about the last capture board you
connected your mobile device to that might be useful when contacting SMARTfor support.
l The date when you last connected to the capture board
l Capture board ID
l Dimensions
l Serial number
l Model number
l Firmware version
To access diagnostic information
Tap Settings > Advanced > Diagnostic Information.
The diagnostic information appears.