Data Sheet

WL1801MOD, WL1805MOD, WL1831MOD, WL1835MOD
SWRS152M – JULY 2013 – REVISED OCTOBER 2017
www.ti.com
PACKAGE OPTION ADDENDUM
Orderable Device Status(1) Package Type
Package
Drawing
Pins Package Qty Eco Plan(2) Lead/Ball Finish MSL Peak Temp (°C) (3) Op Temp (°C)
WL1801MODGBMOCR ACTIVE
QFM MOC
100 1200
Green NiPdAu
250 –20 to 70
WL1801MODGBMOCT ACTIVE
QFM MOC
100 250
Green NiPdAu
250 –20 to 70
WL1805MODGBMOCR ACTIVE
QFM MOC
100 1200
Green NiPdAu
250 –20 to 70
WL1805MODGBMOCT ACTIVE
QFM MOC
100 250
Green NiPdAu
250 –20 to 70
WL1831MODGBMOCR ACTIVE
QFM MOC
100 1200
Green NiPdAu
250 –20 to 70
WL1831MODGBMOCT ACTIVE
QFM MOC
100 250
Green NiPdAu
250 –20 to 70
WL1835MODGBMOCR ACTIVE
QFM MOC
100 1200
Green NiPdAu
250 –20 to 70
WL1835MODGBMOCT ACTIVE
QFM MOC
100 250
Green NiPdAu
250 –20 to 70
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PRE_PROD Unannounced device, not in production, not available for mass market, nor on the web, samples not available.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS Compliance: This product has an RoHS exemption for one or more subcomponent(s). The product is otherwise considered Pb-Free (RoHS compatible) as defined above.
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer: The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on
information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties.
TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming
materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
46 Mechanical, Packaging, and Orderable Information
Submit Documentation Feedback