User's Manual

Layout Guidelines www.ti.com
Figure 18. Module Layout Guidelines (Top Layer)
Figure 19. Module Layout Guidelines (Bottom Layer)
Figure 20 shows the trace design for the PCB. A 50-Ω impedance match on the trace to the antenna
should be used. Also, 50-Ω traces are recommended for the PCB layout.
18
WL1835MODCOM8B WLAN MIMO and Bluetooth
®
Module Evaluation Board SWRU359C–September 2013–Revised January 2014
for TI Sitara™ Platform
Submit Documentation Feedback
Copyright © 2013–2014, Texas Instruments Incorporated