Datasheet

3
®
VSP3100
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN
assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject
to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not
authorize or warrant any BURR-BROWN product for use in life support devices and/or systems.
Supply Voltage
(2)
.............................................................................................................. +6.5V
Supply Voltage Differences
(3)
................................................................................... ±0.1V
GND Voltage Differences
(4)
........................................................................................ ±0.1V
Digital Input Voltage ................................................. –0.3V to (V
CC
+ 0.3V)
Analog Input Voltage................................................ –0.3V to (V
CC
+ 0.3V)
Input Current (any pins except suppplies) ...................................... ±10mA
Operating Temperature ........................................................ 0°C to +85°C
Storage Temperature ...................................................... –55°C to +150°C
Junction Temperature .................................................................... +150°C
Lead Temperature (soldering) ....................................................... +150°C
Package Temperature (IR Reflow, peak, 10s) ............................... +260°C
Package Temperature (IR Reflow, peak, 5s) ................................. +235°C
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may degrade
device reliability. These are stress ratings only, and functional operation of the
device at these or any other conditions beyond those specified is not implied.
(2) V
CC
, V
DRV
. (3) Among V
CC
. (4) Among AGND.
ABSOLUTE MAXIMUM RATINGS
(1)
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
PRODUCT PACKAGE
VSP3100Y DEM-VSP3100Y
DEMO BOARD ORDERING INFORMATION
PACKAGE SPECIFIED
DRAWING TEMPERATURE PACKAGE ORDERING TRANSPORT
PRODUCT PACKAGE NUMBER RANGE MARKING NUMBER
(1)
MEDIA
VSP3100Y LQFP-48 340 0°C to +85°C VSP3100Y VSP3100Y 250-Piece Tray
""""VSP3100Y VSP3100Y/2K Tape and Reel
NOTE: (1) Models with a slash (/) are available only in Tape and Reel in the quantities indicated (e.g., /2K indicates 2000 devices per reel). Ordering 2000 pieces of
“VSP3100Y/2K” will get a single 2000-piece Tape and Reel.
PACKAGE/ORDERING INFORMATION
Not Recommended for New Designs