Datasheet
Not Recommended for New Designs
VSP2582
SBES002B –JUNE 2008–REVISED JUNE 2011
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION
(1)
SPECIFIED
PACKAGE- PACKAGE TEMPERATURE PACKAGE ORDERING TRANSPORT
PRODUCT LEAD DESIGNATOR RANGE MARKING NUMBER MEDIA, QUANTITY
VSP2582RHN Tray, 250
VSP2582RHN QFN-36 RHN –25°C to +85°C VSP2582
VSP2582RHNR Tape and Reel, 2000
VSP2582RHH Tray, 490
VSP2582RHH QFN-36 RHH –25°C to +85°C VSP2582
VSP2582RHHR Tape and Reel, 2500
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
ABSOLUTE MAXIMUM RATINGS
(1)
Over operating free-air temperature range (unless otherwise noted).
PARAMETER VSP2582 UNIT
Supply voltage V
CC
, V
DD
+4.0 V
Ground voltage differences: AGND, DGND ±0.1 V
Digital input voltage –0.3 to (V
DD
+ 0.3) V
Analog input voltage –0.3 to (V
CC
+ 0.3) V
Input current (any pins except supplies) ±10 mA
Ambient temperature under bias –25 to +85 °C
Storage temperature –55 to +125 °C
Junction temperature +150 °C
Package temperature (reflow, peak) +250 °C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. Exposure to absolute-
maximum-rated conditions for extended periods may affect device reliability. These are stress ratings only and functional operation of
the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied.
RECOMMENDED OPERATING CONDITIONS
Over operating free-air temperature range (unless otherwise noted).
MIN NOM MAX UNIT
Analog supply voltage V
CC
2.7 3.0 3.6 V
Digital supply voltage V
DD
2.7 3.0 3.6 V
Digital input logic family CMOS
MCK 12 36 MHz
Digital input clock frequency
SCLK 20 MHz
Digital output load capacitance 20 pF
Operating free-air temperature, T
A
–25 +85 °C
2 Submit Documentation Feedback Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Links: VSP2582