Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1) (2)
VCA8500
SBOS390A – JANUARY 2008 – REVISED MARCH 2008
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION
(1)
SPECIFIED
PACKAGE- PACKAGE TEMPERATURE PACKAGE ORDERING TRANSPORT MEDIA, ECO
PRODUCT LEAD DESIGNATOR RANGE MARKING NUMBER QUANTITY STATUS
(2)
VCA8500IRGCT Tape and Reel, 250
Pb-Free,
VCA8500 QFN-64 RGC – 40 ° C to +85 ° C VCA8500
Green
VCA8500IRGCR Tape and Reel, 2000
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com .
(2) Eco-Status information: Additional details including specific material content can be accessed at www.ti.com/leadfree
GREEN: Ti defines Green to mean Lead (Pb)-Free and in addition, uses less package materials that do not contain halogens, including
bromine (Br), or antimony (Sb) above 0.1% of total product weight.
N/A: Not yet available Lead (Pb)-Free; for estimated conversion dates, go to www.ti.com/leadfree .
Pb-FREE: Ti defines Lead (Pb)-Free to mean RoHS compatible, including a lead concentration that does not exceed 0.1% of total
product weight, and, if designed to be soldered, suitable for use in specified lead-free soldering processes.
NOTE
These packages conform to Lead-Free and Green Manufacturing Specifications.
Over operating free-air temperature range, unless otherwise noted.
PARAMETER VCA8500 UNIT
Supply voltage range, AVDD1 – 0.3 to +3.9 V
Supply voltage range, AVDD2 – 0.3 to +6 V
Supply voltage range, DVDD – 0.3 to +3.9 V
Voltage at analog inputs – 0.3 to (AVDD1 +0.3) V
Voltage at digital inputs – 0.3 to (DVDD to +0.3) V
Soldering temperature (lead, 5s)
(3)
+260 ° C
Maximum junction temperature (T
J
), any condition
(2)
+150 ° C
Maximum junction temperature (T
J
), continuous operation, long-term
+125 ° C
reliability
(2)
Storage temperature range, T
stg
– 55 to +150 ° C
Operating temperature range, T
A
– 40 to +85 ° C
Human body model (HBM) 2000 V
ESD rating Charged device model (CDM) 1000 V
Machine model (MM) 200 V
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to the ground terminal, which is the exposed thermal pad of the package.
(3) Both the part being reworked and the board must be baked out before rework to reduce the risk of delamination. Refer to Application
Note SLUA271 (available for download at www.ti.com ) for recommended rework techniques.
2 Submit Documentation Feedback Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): VCA8500