Datasheet

External
Pin
+V
S
-V
S
Internal
Circuitry
ESDProtectiondiodesinternally
connectedtoallpins.
VCA810
www.ti.com
SBOS275F JUNE 2003REVISED DECEMBER 2010
INPUT AND ESD PROTECTION present. The diodes can typically withstand a
continuous current of 30mA without destruction. To
The VCA810 is built using a very high-speed
ensure long-term reliability, however, diode current
complementary bipolar process. The internal junction
should be externally limited to 10mA whenever
breakdown voltages are relatively low for these very
possible.
small geometry devices. These breakdowns are
reflected in the Absolute Maximum Ratings table.
All pins on the VCA810 are internally protected from
ESD by means of a pair of back-to-back,
reverse-biased diodes to either power supply, as
shown in Figure 49. These diodes begin to conduct
when the pin voltage exceeds either power supply by
about 0.7V. This situation can occur with loss of the
amplifier power supplies while a signal source is still
Figure 49. Internal ESD Protection
REVISION HISTORY
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision E (August, 2008) to Revision F Page
Updated document format to current standards ................................................................................................................... 1
Deleted lead temperature specification from Absolute Maximum Ratings table .................................................................. 2
Corrected typo in Figure 30 ................................................................................................................................................ 11
Changes from Revision D (February, 2006) to Revision E Page
Changed rails quantity from 100 to 75. ................................................................................................................................. 2
Changed storage temperature minimum value in Absolute Maximum Ratings table from –40°C to –65°C ........................ 2
Copyright © 2003–2010, Texas Instruments Incorporated Submit Documentation Feedback 23
Product Folder Link(s): VCA810