Datasheet

Overview www.ti.com
2.2 Default Configuration
Figure 1 shows the default configuration of the EVM from the factory. The accompanying list identifies the
basic components on the EVM board.
Figure 1. VCA5807EVM Basic Configuration
1. P1 – Power supplies connector
2. JP2, and JP3 are set to enable 3.3-V and 5-V power supplies to the device
3. JP15: Enables onboard VCNT
4. P17: Disables PDB_Global
5. P15: Chooses the device Common Mode for the I/V Amp Common Mode
6. P16: Chooses Vss as –5 V for low-side power supply on I/V Amp
4
VCA5807 Development Guide SLOU352–November 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated