Datasheet

UCD90SEQ64EVM-650 GUI Setup

www.ti.com

3.2 UCD90SEQ64EVM-650 GUI Operation

The EVM comes preloaded with a 12-rail default project that illuminates the onboard GPIO LED's at power

up. It is a good idea to export the default project to a file on the PC prior to making changes. To do this,

go to the File menu and select Save Project As … then select a project file name and location.

3.2.1 Launch TI Fusion Digital Power Designer

Navigate to the location where the Fusion GUI is installed and (Start, All Programs, Texas Instruments

Fusion Digital Power Designer, Fusion Digital Power Designer), and start it. A window similar to the

following illustration appears.

UCD90SEQ64EVM-650:— 64-Pin Sequencer Development Board SLVU423–December 2010

Submit Documentation Feedback