Datasheet

www.ti.com

Appendix A Summary of Using Code Composer Studio v3.3

In this appendix, we describe basic steps how to use Code Composer Studio v3.3, or CCS, to compile

firmware for UCD3138. A design flow is described while detailed steps for firmware code creation, and

firmware debugging along with hardware are obviously beyond the scope of this user’s guide and this

appendix.

A.1 Set up Code Composer Studio v3.3 for UCD3138

The recommended version of Code Composer Studio is v3.3. After completing the CCS v3.3 installation,

and when first time open CCS, a window as shown in Figure 24 is prompted to allow users to select the

required configuration. For the UCD3138 device, please select ARM7 SIMULATOR BIG ENDIAN. Click

ADD and then Save & Quit.

If CCS has existing configurations in My System, click Launch Setup under File pull-down menu. Select

Remove All to remove the existing configurations; then select ARM7 SIMULATOR BIG ENDIAN as

shown in Figure 24, Click ADD and then Save & Quit for UCD3138 device.

Figure 24. Set up Code Composer Studio v3.3 for UCD3138

SLUUA10–October 2012 Summary of Using Code Composer Studio v3.3

Submit Documentation Feedback