Datasheet

USB-to-GPIO

PC Computer

USB Adapter LED

UCD3138CC64EVM-030

EVM LED

Reset Button

www.ti.com

Equipment Setup

6.2 Hardware Setup

6.2.1 Setup Overview

The connection between UCD3138CC64EVM-030 and the PC computer through USB-to-GPIO Interface

Adapter is shown in Figure 5.

For USB adapter connection, complete the following:

• Connect one end of the ribbon cable to the EVM, and connect the other end to the USB interface

adapter.

• Connect the mini connector of the USB cable to the USB interface adapter, and connect the other end

to the USB port of the PC computer.

Figure 5. UCD3138CC64EVM-030 Test Connections

SLUU886A–February 2012–Revised July 2013 Control Card for Digitally Controlled Isolated Power Converters

Submit Documentation Feedback