Datasheet

SLUU166A - December 2003 − Revised February 2004
4
UCC39002 Advanced Load-Share Controller User’s Guide, HPA027A
UCC39002 Advanced Load-Share Controller User’s Guide,
HPA027A
Lisa Dinwoodie
System Power
ABSTRACT
The UCC39002 is an advanced, high-performance load-share controller that provides all the
necessary functions to parallel multiple independent power supplies or dc-to-dc modules. This
load-share circuit is based upon the automatic master/slave architecture utilized in the UC3902 and
the UC3907 load-share controllers providing better than 1% current-share error between the modules
at full load.
Contents
1 Introduction 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Caution 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Applications 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Features 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Schematic 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Design Procedure 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 List of Materials 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 Board Layout 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 Connection Diagram 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 Conclusion 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11 References 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12 Appendix 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Introduction
The UCC39002 load-share controller allows accurate current sharing between paralleled power modules. The
evaluation module provides an optimum layout to parallel up to three modules on a board in which most of the
reference designators are unpopulated. This user’s guide will facilitate component selection for the modules to
be current shared. Component values are dependent upon the specific power modules and must be calculated
for each load-share system.
2 Caution
Dependent upon the power modules being paralleled, there may be high voltages present on this EVM. Some
components under maximum power may be hot. Precautions should be taken. The maximum load current for
this evaluation board is recommended to be 10 A from each module being paralleled. Due to the absolute
maximum voltage ratings of the current sense amplifier inputs and the adjust pin input, this evaluation module
is limited to use with converters whose output voltages do not exceed 15 V.