Datasheet

Performance Data and Typical Characteristic Curves

www.ti.com

6.6 Output Ripple Voltage at Full Load

• CH4 = V

OUT

at EVM output.

• CH2 = V

OUT

measure at the end of the 3 M of cable in parallel with a 1-µF capacitor. The output

voltage has less than 50 mV of output ripple at the end of the cable.

Figure 13. Output Ripple Voltage at Full Load

Using the UCC28711EVM-160 5-W USB Adapter SLUUA12–November 2012

Submit Documentation Feedback