Datasheet

UCC28710, UCC28711
UCC28712, UCC28713
UCC28714, UCC28715
SLUSB86 –NOVEMBER 2012 www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Table 1. PRODUCT INFORMATION
(1)(2)
PACKAGE PINS MINIMUM
ORDERABLE
SWITCHING OPTIONS
DEVICES
FREQUENCY (Hz)
UCC28710D Programmable cable compensation
NTC option, 0-mV (at 5-V output) cable
UCC28711D
compensation
680
NTC option, 150-mV (at 5-V output) cable
UCC28712D
compensation
SOIC (D) 7
NTC option, 300-mV (at 5-V output) cable
UCC28713D
compensation
UCC28714D 340 Programmable cable compensation
UCC28715D 1500 Programmable cable compensation
(1) See Orderable Addendum for specific device ordering information.
(2) For other fixed cable compensation options, please consult the factory.
ABSOLUTE MAXIMUM RATINGS
(1)
MIN MAX UNIT
Start-up pin voltage, HV V
HV
700
V
Bias supply voltage, VDD V
VDD
38
Continuous gate current sink I
DRV
50
Continuous gate current source I
DRV
Self- limiting mA
Peak current, VS I
VS
−1.2
Gate drive voltage at DRV V
DRV
−0.5 Self- limiting
VS −0.75 7 V
Voltage range
CS, CBC, NTC −0.5 5
Operating junction temperature range T
J
−55 150
Storage temperature T
STG
−65 150 °C
Lead temperature 0.6 mm from case for 10 seconds 260
Human-body model (HBM) 2000
ESD rating V
Charged-device model (CDM) 500
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltages
are with respect to GND. Currents are positive into, negative out of the specified terminal. These ratings apply over the operating
ambient temperature ranges unless otherwise noted.
2 Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated
Product Folder Links: UCC28710, UCC28711 UCC28712, UCC28713 UCC28714, UCC28715