Datasheet

UCC28700, UCC28701
UCC28702, UCC28703
SLUSB41 – JULY 2012 www.ti.com
Table 1. PRODUCT INFORMATION
(1)(2)
PART NUMBER PACKAGED DEVICES VERSION
UCC28700 Programmable cable compensation
UCC28701 NTC, 0 mV (at 5-V output) cable compensation option
SOT23 6-Pin (DBV)
UCC28702 NTC, 150 mV (at 5-V output) cable compensation option
UCC28703 NTC, 300 mV (at 5-V output) cable compensation option
(1) See Addendum for specific device ordering information.
(2) For other fixed cable compensation options, please consult the factory.
ABSOLUTE MAXIMUM RATINGS
(1)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
Bias supply voltage V
VDD
38 V
Continuous gate current sink I
DRV
50
Self-
Continuous gate current source I
DRV
mA
limiting
Peak VS pin current I
VS
−1.2
Self-
Gate-drive voltage at DRV V
DRV
−0.5
limiting
VS −0.75 7 V
Voltage range
CS, CBC (UCC28700),
−0.5 5
NTC (UCC28701/2/3)
Operating junction temperature range T
J
−55 150
Storage temperature T
STG
−65 150 °C
Lead temperature 0.6 mm from case for 10 seconds 260
Human-body model (HBM) 2000
ESD rating V
Charged-device model (CDM) 500
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltages
are with respect to GND. Currents are positive into, negative out of the specified terminal. These ratings apply over the operating
ambient temperature ranges unless otherwise noted.
2 Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated
Product Folder Link(s): UCC28700, UCC28701 UCC28702, UCC28703