Datasheet

www.ti.com Performance Data and Typical Characteristic Curves
6.5 Load Transients at 230-V RMS Input
Figure 11. 0.1-A to 0.6-A Load Step Figure 12. 0.6-A to 0.1-A Load Step
6.6 Output Ripple Voltage
• CH4 = V
OUT
at EVM output.
• CH2 = V
OUT
measured at the end of the 1 M of cable in parallel with a 1-µF capacitor. The output
voltage has less than 50 mV of output ripple at the end of the cable.
Figure 13. Output Ripple Voltage at Full Load
9
SLUU968–July 2012 UCC28700EVM-068 5-W USB Adapter
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated