Datasheet

UCC28610
www.ti.com SLUS888F –JANUARY 2009–REVISED SEPTEMBER 2012
Typical Schematic and Layout
It is possible to design a power supply on a single layer board using the UCC28610. Figure 36 and Figure 37
show an example of a typical layout and design, respectively. Proper use of ground planes can solve EMI and
thermal problems. For best results, create a quiet ground plane for the components associated with pins 1
through 4. This offers shielding for the control signals. Also, do not extend the ground plane under heat sinks,
thermistors or snubbers so that these components do not heat the UCC28610.
Figure 36. Typical Layout of the Device on a Single Layer PCB
NOTE
The reference designators correspond to the components shown in the schematic of
Figure 37.
Copyright © 2009–2012, Texas Instruments Incorporated Submit Documentation Feedback 31
Product Folder Links: UCC28610