Datasheet

R
CL
CL
I
CL
Peak
Current
Control
I
FB
I
FB
I
DRV
DRV
GND
Driver
I
DRV
I
FB
FB
FromEmitter
ofOpto-
Coupler
FromSource
of
HVMOSFET
t
BLANK,(Ilim)
PWM
Comparator
100000
I
CL
PWMFlip-
FlopCLR
CurrentModulator
1
6
7
3
UCC28610
www.ti.com SLUS888F –JANUARY 2009–REVISED SEPTEMBER 2012
Primary Current Sense
The UCC28610 uses a current mirror technique to sense primary current in the Current Modulator. See Figure 27
for details. All of the primary current passes into the DRV pin, through the Driver MOSFET and out of the GND
pin. The Driver MOSFET current is scaled and reflected to the PWM Comparator where it is compared with the
CL current. At the beginning of each switching cycle a blanking pulse, t
BLANK,(Ilim)
, of approximately 220 ns is
applied to the internal current limiter to allow the driver to turn on without false limiting on the leading edge
capacitive discharge currents normally present in the circuit.
Figure 27. CL pin and DRV Current Sense
Copyright © 2009–2012, Texas Instruments Incorporated Submit Documentation Feedback 21
Product Folder Links: UCC28610