Datasheet

SLUU165A − November 2003 − Revised July 2004
9
UCC28514 User’s Guide
REFERENCE QTY DESCRIPTION MANUFACTURER PART NUMBER
R1 1 Resistor, wirewound, 3 W, axial, 187500 Huntington Electric ALSR−3−.33−1%
R2, R4 2 Resistor, chip, 10 kΩ, 1/4 W, 1%, 1210 Panasonic ERJ−14NF1002U
R3 1 Resistor, chip, 49.9 kΩ, 1/4 W, 1%, 1210 Panasonic ERJ−14NF4992U
R5 1 Resistor, power metal film, 500 V, 3 W, 5±%, 1,000 X
0.200
BCcomponents 5093NW82K00J08AFX
R6 1 Resistor, power metal film, 2 kΩ, 3 W, 5±%, 1,000 X
0.200
BCcomponents 5093NW2K00J08AFX
R7 1 Resistor, chip, 20 Ω, 1/4 W, 5%, 1210 Panasonic ERJ−14YJ200U
R8 1 Resistor, chip, 3 kΩ, 1/10 W, 1%, 805 Std Std
R9 1 Resistor, power metal film, 82 kΩ, 3 W, 5±%, 1,000 X
0.200
BCcomponents 5093NW82K00J08AFX
R10 1 Resistor, chip, 100 Ω, 1/4 W, 5%, 1210 Panasonic ERJ−14YJ101U
R11 1 Resistor, metal oxide, 1.0 Ω, 1 W, 5%, 0.150 x 0.700 Yageo RSF100JB−1R0
R12 1 Resistor, chip, 10 kΩ, 1/10 W, 1%, 805 Panasonic ERJ−6ENF1002V
R13, R20 2 Resistor, chip, 1 kΩ, 1/10 W, 1%, 805 Panasonic ERJ−6ENF1001V
R14 1 Resistor, chip, 680 Ω, 1/10 W, 1%, 805 Yageo America 9C08052A6800FKHFT
R15 1 Resistor, chip, 100 Ω, 1/10 W, 1%, 805 Std Std
R16, R21 2 Resistor, chip, 866 Ω, 1/10 W, 1%, 805 Panasonic ERJ−6ENF8660V
R17 1 Resistor, chip, 1.4 kΩ, 1/10 W, 1%, 805 Std Std
R18 1 Resistor, chip, 47 Ω, 1/10 W, 1%, 805 Panasonic ERA−S27J470V
R19 1 Resistor, chip, 8.66 kΩ, 1/10 W, 1%, 805 Panasonic ERJ−6ENF8661V
RETURN1 0 Connector, binding post, insulated, for standard banana
plug, black, 15 A, 141860
Johnson 111−0703−001
T1** 1 Boost Inductor, 20 primary, 1 secondary, 1.7 mH, 2.5 A,
1,260 x 1,220
Cooper CTX16−16364
T2** 1 XFMR, 100 kHz, 750 µH, toroid, ferrite Coiltronics, Inc CTX08−14225
T3** 1 Transformer, 5.78 primary, 1 secondary, 37 mH, 0.75 A,
1,260 x 1,220
Cooper CTX16−16365
TP1, TP2 0 Jack, test point, clrcle Farnell 240−3xx
U1** 1 Optocoupler, 5300 V, 100% center, SMD Fairchild 4N36S
X1 at HS1, HS3,
HS4, HS5
4 Thermal pad silicon TO220 BERQUIST
X1 at HS1, HS3,
HS4, HS5
4 Nut #6X32 (steel)
X1 at HS1, HS3,
HS4, HS5
4 Split lock washer #6(steel)
X1 at HS1, HS3,
HS4, HS5
4 Flat washer #6 (steel)
X1 at HS1, HS3,
HS4, HS5
4 Nylon shoulder washer #6 Keystone Electronics
X1 at HS1, HS3,
HS4, HS5
4 Pan head screw #6−32X7/16 (steel)
NOTES: (1) These assemblies are ESD sensitive, ESD precautions shall be observed.
(2) These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.
(3) These assemblies must comply with workmanship standards IPC−A−610 Class 2.
(4) Reference designators marked with an asterisk (’**’) cannot be substituted. All other components can be substituted with equivalent
MFG’s components.