Datasheet

8 List of Materials
List of Materials www.ti.com
Table 2 lists the EVM components as configured according to the schematics (see Section 4 ).
Table 2. List of Materials
COUNT REF DES DESCRIPTION PART NUMBER MFR
4 AC_LINE, Connector, banana jack, uninsulated, 3267, 3267 Pomona
AC_NEUTRAL, 0.500 dia. inch
RETURN, VOUT
1 C1 Capacitor, film, 275VAC, 20%, 0.1 µ F, 0.689 x ECQU2A104BC1 Panasonic
0.236 inch
1 C11 Capacitor, ceramic, 16 V, X7R, 10%, 220 nF, Std Std
1206
2 C12, C13 Capacitor, ceramic, 16 V, X7R, 10%, 2.2 µ F, Std Std
0805
1 C14 Capacitor, aluminum, 35 V, 20%, 22 µ F, 0.200 * ECA-1VM220 Panasonic
0.435 inch
1 C15 Capacitor, ceramic, 25 V, X7R, 10%, 1 nF, 0805 Std Std
1 C17 Capacitor, ceramic, 25 V, X7R, 10%, 10 nF, Std Std
0805
1 C2 Capacitor, polyester, 630 V, 10%, 0.047 µ F, ECQ-E6473KZ Panasonic
0.256 x 0.650 inch
2 C3, C4 Capacitor, aluminum, 450 VDC, 20% , 100 µ F, EKXG451ELL101 Nippon
18 x 40 mm MM40S Chemi-con
2 C5, C6 Capacitor, film, 275 VAC, 20%, 0.47 µ F, 0.236 X ECQ-U2A474MG Panasonic
0.591
2 C7, C10 Capacitor, ceramic, 25 V, X7R, 10%, 22 pF, Std Std
0805
3 C8, C9, C16 Capacitor, ceramic, 25 V, X7R, 10%, 1.2 nF, Std Std
0805
3 D1, D2, D4 Diode, 3000 mA, 600 V, SMC MURS360T3 On Semi
1 D3 Diode, bridge, 6 A, 600 V, BU6 GBU6J Vishay
2 F1 Fuse clip, 5x20 mm 0100056H Wickmann
3 HS1, HS2, HS3 Heatsink, universal-mount TO-220, 7-345-2PP, 7-345-2PP IERC-CTS
1.500 x 2.000 inch
1 J1 Terminal block, 2 pin, 15 A, 5.1 mm, ED1609 OST
ED1609-ND, 0.40 x 0.35 inch
3 JP1, JP2, JP3 Jumper, 2.000 inch length, PVC insulation, AWG 923345-20-C 3M
22, 0.035 inch dia.
1 JP4 Jumper, 2.100 inch length, PVC insulation, AWG 923345-21-C 3M
22, 0.035 inch dia.
1 JP5 Jumper, 0.500 inch length, PVC insulation, AWG 923345-05-C 3M
22, 0.035 inch dia
2 JP6, JP8 Jumper, 0.700 inch length, PVC insulation, AWG 923345-07-C Belden
22
1 JP7 Jumper, 0.100 inch length, non-insulated, AWG 923345-01-C Belden
22
1 JP10 Header, 2-pin, 100-mil spacing, (36-pin strip), PTC36SAAN Sullins
PTC36SAAN, 0.100 inch x 2
1 JP9 Jumper, 1.2 inch length, PVC insulation, AWG 923345-20-C 3M
22, 0.035 inch dia.
2 L1, L2** Inductor, boost PFC with aux. 330 uH @ 5.3 A CTX16-17769R Cooper
PK, 1.555 Dia. inch
2 Q1, Q2 MOSFET, N-channel, 500 V, 11 A, 520 m Ω , IRFB11N50APbF IR
TO-220V
1 R1 Resistor, chip, 1/10 W, 1%, 51.1 Ω , 0805 Std Std
2 R11, R14 Resistor, chip, 1/10 W, 1%, 20.5 k Ω , 0805 Std Std
14 UCC28061EVM 300-W Interleaved PFC Pre-Regulator SLUU316 – August 2008
Submit Documentation Feedback