Datasheet

UCC27523, UCC27524, UCC27525, UCC27526
www.ti.com SLUSAQ3F –NOVEMBER 2011–REVISED MAY 2013
ABSOLUTE MAXIMUM RATINGS
(1)(2)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
Supply voltage range VDD -0.3 to 20.0
DC -0.3 to VDD + 0.3 V
OUTA, OUTB voltage
Repetitive pulse < 200 ns
(3)
-2.0 to VDD + 0.3
Output continuous source/sink
I
OUT_DC
0.3
current
A
Output pulsed source/sink current
I
OUT_pulsed
5
(0.5 µs)
INA, INB, INA+, INA-, INB+, INB-, ENA, ENB voltage
(4)
-0.3 20
Human body model, HBM 4000 V
ESD
(5)
Charge device model, CDM 1000
Operating virtual junction temperature, T
J
range -40 150
Storage temperature range, T
stg
-65 150
°C
Soldering, 10 sec. 300
Lead temperature
Reflow 260
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to GND unless otherwise noted. Currents are positive into, negative out of the specified terminal. See
Packaging Section of the datasheet for thermal limitations and considerations of packages.
(3) Values are verified by characterization on bench.
(4) The maximum voltage on the Input and Enable pins is not restricted by the voltage on the VDD pin.
(5) These devices are sensitive to electrostatic discharge; follow proper device handling procedures.
RECOMMENDED OPERATING CONDITIONS
over operating free-air temperature range (unless otherwise noted)
MIN TYP MAX UNIT
Supply voltage range, VDD 4.5 12 18 V
Operating junction temperature range -40 140 °C
Input voltage, INA, INB, INA+, INA-, INB+, INB- 0 18 V
Enable voltage, ENA and ENB 0 18
Copyright © 2011–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: UCC27523, UCC27524, UCC27525, UCC27526