Datasheet

Modifications
1-3
Introduction
1.3 Modifications
The UC385EVM-207 is designed to allow parts to be easily interchanged.
Although the EVM is designed with a UC385-ADJ regulator in a TO-263
package, the SLVP207 EVM board can also accommodate any other member
of the UCx82 or UCx85 families in either the TO-263 or TO-220 or any device
with the same pinout in a TO-220, TO-263, or SOT-223 package. Passive
elements such as the output capacitors (C4, C5) and the input capacitor (C3)
can be easily changed. The EVM uses resistors R3 and R4 as the feedback
resistors for the adjustable regulators. Capacitor C2 is used to reduce the
inductance from long power source input leads and may or may not be
necessary depending on the specific test setup.