Datasheet
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
UC1707 , UC2707 , UC3707
www.ti.com
............................................................................................................................................. SLUS177B – MARCH 1999 – REVISED SEPTEMBER 2008
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
IN
Supply voltage N/J package 40 V
V
C
Collector supply voltage N/J package 40 V
Output current (each output, source or sink) steady-state N/J package ± 500 mA
N package ± 1.5
Peak transient A
J package ± 1.0
N package 20
Capacitive discharge energy mJ
J package 15
Digital inputs
(1)
N/J-package 5.5 V
Analog stop inputs N/J package V
IN
N package 2
Power dissipation at T
A
= 25 ° C W
J package 1
N package 5
Power dissipation at T (leads/case) = 25 ° C
(1)
W
J package 2
Operating temperature range – 55 +125 ° C
Storage temperature range – 65 +150 ° C
Lead temperature (soldering, 10 seconds) 300 ° C
(1) All voltages are with respect to the four ground pins which must be connected together. All currents are positive into, negative out of the
specified terminal. Digital drive can exceed 5.5 V if input current is limited to 10 mA. Consult packaging section of databook for thermal
limitations and considerations of package.
Unless otherwise stated, these specifications apply for T
A
= – 55 ° C to +125 ° C for the UC1707, – 25 ° C to +85 ° C for the
UC2707, and 0 ° C to +70 ° C for the UC3707; V
IN
= V
C
= 20 V. T
A
= T
J
.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
V
IN
Supply current V
IN
= 40 V 12 15 mA
V
C
Supply current V
C
= 40 V, outputs low 5.2 7.5 mA
V
C
Leakage current V
IN
= 0, V
C
- 30 V, no load 0.05 0.1 mA
Digital input low level 0.8 V
Digital input high level 2.2 V
Input current V
I
= 0 – 0.06 – 1.0 mA
Input leakage V
I
= 5 V 0.05 0.1 mA
I
O
= – 50 mA 2.0
V
C
– V
O
Output high sat. V
I
O
= – 500 mA 2.5
I
O
= – 50 mA 0.4
V
O
Output low sat. V
I
O
= – 500 mA 2.5
Analog threshold V
CM
= 0 to 15 V 100 130 160 mV
Input bias current V
CM
= 0 – 10 – 20 µ A
Thermal shutdown 155 ° C
Shutdown threshold Pin 7 input 0.4 1.0 2.2 V
Latch disable threshold Pin 3 input 0.8 1.2 2.2 V
Copyright © 1999 – 2008, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): UC1707 UC2707 UC3707