Datasheet

Setup Procedure
www.ti.com
3 Setup Procedure
Ensure that VCCA, VCCB and GND are all connected and configured properly. Bypass capacitors on the
VCCA and VCCB are recommended and will optimize device performance.
When connecting signals, minimize connection length and keep GND leads short when probing. This will
ensure minimal capacitive, resistive and inductive loading caused by the connection and connector.
For more device information please see the TXB0304 device datasheet or visit the TI support forums :
e2e.ti.com.
4 PCB Layout
Figure 1. Top Layer
2
TXB0304 Evaluation Module SCEU003 September 2011
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated