Datasheet

Setup Procedure

www.ti.com

3 Setup Procedure

Ensure that VCCA, VCCB and GND are all connected and configured properly. Bypass capacitors on the

VCCA and VCCB are recommended and will optimize device performance. When connecting signals,

minimize connection length and keep GND leads short when probing. This will ensure minimal capacitive,

resistive and inductive loading caused by the connection and connector.

For more device information see the TXB0302 device datasheet or visit the TI support forums: e2e.ti.com.

4 TXB0302 EVM PCB Layout Image

Figure 1. TXB0302 EVM Layout

TXB0302 Evaluation Module SCEU007–March 2012

Submit Documentation Feedback