Datasheet

TVP5158, TVP5157, TVP5156
www.ti.com SLES243G –JULY 2009–REVISED APRIL 2013
Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
REVISION COMMENTS
SLES243 Initial release
SLES243A Table 2-1, XTAL_REF description change.
Figure 3-21, 0-Ω resistor added inline between XTAL_REF pin and VSSA.
SLES243B YUV references changed to YCbCr.
Section 1, Trademarks added.
Table 2-1, XTAL_IN, XTAL_REF, and XTAL_OUT terminal descriptions moved to Analog Section.
Section 3.1.2, Analog Video Input Clamping description changed.
Section 3.9.4, Analog Audio Input Clamping description added.
Section 3.11, Clock Circuit description changed.
SLES243C Section 1.5, Trademarks added.
Section 1.6, Document Conventions added.
Section 1.7, Package options added.
Section 3.9.3, Serial Audio Interface added.
Figure 3-18, Serial Audio Interface Timing Diagram added.
Table 4-14, Luminance Brightness description modified.
Table 4-15, Luminance Contrast description modified.
Table 4-16, Brightness and Contrast Range Extender register added.
Table 4-17, Chrominance Saturation description modified.
Table 4-65, Interrupt Control register added.
Minor editorial changes throughout.
SLES243D AEC-Q100 qualification added.
Section 3.8.3.3, Added comment about INTREQ outputs in video cascade mode
Section 3.10.3, Added VBUS access information.
Table 4-1, Added VBUS data and address registers.
Table 4-89, Added VBUS data register description.
Table 4-90, Added VBUS address register description.
Table 3-5, Added output format settings for I
2
C address B0h.
Table 3-6, Added output format settings for I
2
C address B0h.
Table 3-10, Combined original Table 3-11 with Table 3-10.
Table 3-10, Added output format settings for I
2
C address B0h.
Section 3.8.3.4, Added Hybrid Mode section.
Table 3-11, Added default super-frame output format table.
Figure 3-15, Made minor editorial changes.
Figure 3-16, Made minor editorial changes.
Table 4-1, Added super-frame EAV2SAV and SAV2EAV duration status (D0h-D3h)
Table 4-43, Modified TV/VCR mode detection description.
Table 4-19, Modified definition for color killer threshold control.
Table 4-43, Deleted obsolete stable sync control bits.
Table 4-50, Changed the default value for I
2
C address 88h from 00h to 03h.
Table 4-86, Added super-frame EAV2SAV duration status (subaddress: D0h-D1h)
Table 4-87, Added super-frame SAV2EAV duration status (subaddress: D2h-D3h)
Section 5.11, Modified package thermal specifications.
Minor editorial changes throughout
Copyright © 2009–2013, Texas Instruments Incorporated Application Information 101
Submit Documentation Feedback
Product Folder Links: TVP5158 TVP5157 TVP5156