Datasheet

www.ti.com
9.3.2 Misc Control
9.3.3 Interleave Field Control 1
9.3.4 Interleave Field Control 2
9.3.5 Interleave Field Control 3
TVP5154
4-CHANNEL LOW-POWER PAL/NTSC/SECAM VIDEO DECODER
WITH INDEPENDENT SCALERS AND FAST LOCK
SLES163A – MARCH 2006 – REVISED JULY 2006
Address 36Bh
Default 0Ch
7 6 5 4 3 2 1 0
Clock rate Clock OE Clock edge
15 14 13 12 11 10 9 8
Scaled blank data
Scaled blank data:
When no active scaled data is available, this value is output during the active video region.
Clock rate:
This register controls various clock modes. Since this register is modified by the device during normal operation, the clock rate bits
should not be modified by the user.
Clock OE:
This register controls various clock modes. Since this register is modified by the device during normal operation, the clock rate bits
should not be modified by the user.
Clock edge:
This register controls various clock modes. Since this register is modified by the device during normal operation, the clock rate bits
should not be modified by the user.
Address 36Dh
Default 0h
7 6 5 4 3 2 1 0
End pixel count[7:0]
15 14 13 12 11 10 9 8
Field count Reserved Blank timing End pixel count[9:8]
End pixel count:
Pixel count at which the frame status is updated. Do not change this value.
Blank timing:
0: No timing signals are generated for blank fields.
1: H, V, and F timing generated for blank fields based on unscaled video timing sequences
Field count:
Number of output fields in field interleaved sequence
Address 36Eh
Default 0h
7 6 5 4 3 2 1 0
Field mode(3) Field mode(2) Field mode(1) Field mode(0)
15 14 13 12 11 10 9 8
Field mode(7) Field mode(6) Field mode(5) Field mode(4)
Address 36Fh
Default 0h
7 6 5 4 3 2 1 0
Field mode(11) Field mode(10) Field mode(9) Field mode(8)
15 14 13 12 11 10 9 8
Field mode(15) Field mode(14) Field mode(13) Field mode(12)
Internal Control Registers62 Submit Documentation Feedback