Datasheet

TVP5154A

SLES214C–DECEMBER 2007–REVISED SEPTEMBER 2010

www.ti.com

7.2.40 Cb Gain Factor Register

Address 2Ch

7 6 5 4 3 2 1 0

Cb gain factor

This is a read-only register that provides the gain applied to the Cb in the YCbCr data stream.

7.2.41 Cr Gain Factor Register

Address 2Dh

7 6 5 4 3 2 1 0

Cr gain factor

This is a read-only register that provides the gain applied to the Cr in the YCbCr data stream.

7.2.42 656 Revision Select Register

Address 30h

Default 00h

7 6 5 4 3 2 1 0

656 Rev

656 revision select:

0 = Adheres to ITU-R BT.656-4 and BT.656-5 timing (default)

1 = Adheres to ITU-R BT.656-3 timing

7.2.43 MSB of Device ID Register

Address 80h

Default 51h

7 6 5 4 3 2 1 0

MSB of device ID

This register identifies the MSB of the device ID. Value = 0x51.

7.2.44 Patch Write Address

Address 7Eh

Default 00h

7 6 5 4 3 2 1 0

R/W[7:0]

This register is used for downloading firmware patch code. Please refer to the patch load application note

for more detail. This register must not be written to or read from during normal operation.

Submit Documentation Feedback

Product Folder Link(s): TVP5154A