Datasheet

TVP5154A
www.ti.com SLES214C–DECEMBER 2007–REVISED SEPTEMBER 2010
1.4 Related Products
• TVP5150AM1
• TVP5151
• TVP5146M2
• TVP5147M1
• TVP5158
1.5 Trademarks
PowerPAD is a trademark of Texas Instruments.
Macrovision is a trademark of Macrovision Corporation.
Gemstar is a trademark of Gemstar-TV Guide International.
Other trademarks are the property of their respective owners.
1.6 Document Conventions
Throughout this data manual, several conventions are used to convey information. These conventions are:
• To identify a binary number or field, a lower case b follows the numbers. For example: 000b is a 3-bit
binary field.
• To identify a hexadecimal number or field, a lower case h follows the numbers. For example: 8AFh is a
12-bit hexadecimal field.
• All other numbers that appear in this document that do not have either a b or h following the number
are assumed to be decimal format.
• If the signal or terminal name has a bar above the name (for example, RESETB), then this indicates
the logical NOT function. When asserted, this signal is a logic low, 0, or 0b.
• RSVD indicates that the referenced item is reserved.
1.7 Ordering Information
PACKAGED DEVICES
(1)
T
A
PACKAGE OPTION
128-PIN TQFP PowerPAD™
TVP5154APNP Tray
0°C to 70°C
TVP5154APNPR Tape and reel
TVP5154AIPNP Tray
–40°C to 85°C
TVP5154AIPNPR Tape and reel
(1) For the most current package and ordering information, see the Package Option Addendum at the end
of this document, or see the TI web site at www.ti.com.
Copyright © 2007–2010, Texas Instruments Incorporated Introduction 3
Submit Documentation Feedback
Product Folder Link(s): TVP5154A