Datasheet

Functional Description

SLES099C—March 2007TVP5147PFP

2.11.27 Sync Control Register

Subaddress 32h

Default 00h

7 6 5 4 3 2 1 0

Reserved Polarity FID Polarity VS Polarity HS VS/VBLK HS/CS

Polarity FID: determines polarity of FID terminal

0 = First field high, second field low (default)

1 = First field low, second field high

Polarity VS: determines polarity of VS terminal

0 = Active low (default)

1 = Active high

Polarity HS: determines polarity of HS terminal

0 = Active low (default)

1 = Active high

VS or VBLK:

0 = VS terminal outputs vertical sync (default)

1 = VS terminal outputs vertical blank

HS or CS:

0 = HS terminal outputs horizontal sync (default)

1 = HS terminal outputs composite sync

2.11.28 Output Formatter 1 Register

Subaddress 33h

Default 40h

7 6 5 4 3 2 1 0

Sampling rate YCbCr code range CbCr code Reserved Output format [2:0]

Sampling rate (changing this bit causes the register settings to be reinitialized):

0 = ITU-R BT.601 sampling rate (default)

1 = Square pixel sampling rate

YCbCr output code range:

0 = ITU-R BT.601 coding range (Y ranges from 64 to 940. Cb and Cr range from 64 to 960.)

1 = Extended coding range (Y, Cb, and Cr range from 4 to 1016.) (default)

CbCr code format:

0 = Offset binary code (2s complement + 512) (default)

1 = Straight binary code (2s complement)

Output format [2:0]:

000 = 10-bit 4:2:2 (pixel x 2 rate) with embedded syncs (ITU-R BT.656) (default)

001 = 20-bit 4:2:2 (pixel rate) with separate syncs

010 = Reserved

011 = 10-bit 4:2:2 with separate syncs

100−111= Reserved

NOTE: 10-bit mode is also used for the raw VBI output mode when bit 4 (VBI raw) in the

luminance processing control 1 register at subaddress 06h is set (see Section 2.11.7).