Datasheet

TVP5147M1
SLES140G –JULY 2005–REVISED FEBRUARY 2012 www.ti.com
NTSC/PAL/SECAM 2 11-Bit Digital Video Decoder
With Macrovision™ Detection, YPbPr Inputs, and 5-Line Comb
Filter
Check for Samples: TVP5147M1
1 Introduction
1.1 Features
12345
video encoder synchronization
• Two 30-MSPS 11-bit A/D channels with
programmable gain control
• Supports NTSC (J, M, 4.43), PAL (B, D, G, H, I,
M, N, Nc, 60), and SECAM (B, D, G, K, K1, L)
CVBS, and S-video
• Supports analog component YPbPr video
format with embedded sync
• Ten analog video input terminals for
multisource connection
• Supports analog video output
• User-programmable video output formats
– 10-bit ITU-R BT.656 4:2:2 YCbCr with
embedded syncs
– 10-bit 4:2:2 YCbCr with separate syncs
– 20-bit 4:2:2 YCbCr with separate syncs
– 2x sampled raw VBI data in active video
during a vertical blanking period
• Certified Macrovision™ copy protection
detection
– Sliced VBI data during a vertical blanking
period or active video period (full field mode)
• Available in commercial (0°C to 70°C) and
industrial (−40°C to 85°C) temperature ranges
• HSYNC/VSYNC outputs with programmable
position, polarity, width, and field ID (FID)
• Qualified for Automotive Applications (AEC-
output
Q100 Rev G − TVP5147M1IPFPQ1 or
TVP5147M1IPFPRQ1)
• Composite and S-video processing
• VBI data processor
– Adaptive 2-D 5-line adaptive comb filter for
composite video inputs; chroma-trap
– Teletext (NABTS, WST)
available
– CC and extended data service (EDS)
– Automatic video standard detection
– Wide screen signaling (WSS)
(NTSC/PAL/SECAM) and switching
– Copy generation management system
– Luma-peaking with programmable gain
(CGMS)
– Patented chroma transient improvement
– Video program system (VPS/PDC)
(CTI)
– Vertical interval time code (VITC)
– Patented architecture for locking to weak,
– Gemstar™ 1×/2× mode
noisy, or unstable signals
– V-Chip decoding
– Single 14.31818-MHz reference crystal for all
– Register readback of CC, WSS (CGMS),
standards
VPS/PDC, VITC and Gemstar 1×/2× sliced
– Line-locked internal pixel sampling clock
data
generation with horizontal and vertical lock
• I
2
C host port interface
signal outputs
• Reduced power consumption: 1.8-V digital
– Genlock output RTC format for downstream
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2PowerPAD, DLP are trademarks of Texas Instruments.
3Gemstar is a trademark of Gemstar-TV Guide Intermational.
4Macrovision is a trademark of Macrovision Corporation.
5All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Products conform to
Copyright © 2005–2012, Texas Instruments Incorporated
specifications per the terms of the Texas Instruments standard warranty. Production
processing does not necessarily include testing of all parameters.