Datasheet

90
SLES084C − August 2007TVP5146
4.2 Example 2
4.2.1 Assumptions
Input connector: S-video [VI_2_C (luma), VI_1_C (chroma)]
Video format: NTSC (J, M, 443), PAL (B, G, H, I, M, N, Nc) and SECAM
Output format: 10-bit 4:2:2 YCbCr with discrete sync outputs
4.2.2 Recommended Settings
Recommended I
2
C writes: This setup requires additional writes to output the discrete sync 10-bit
4:2:2 data, HS, and VS, and to autoswitch between all video formats mentioned above.
I
2
C register address 00h = Input select register
I
2
C data 46h = Sets luma to VI_2_C and chroma to VI_1_C
I
2
C register address 04h = Autoswitch mask register
I
2
C data 3Fh = Includes NTSC 443 and PAL (M, Nc) in the autoswitch
I
2
C register address 08h = Luminance processing control 3 register
I
2
C data 00h = Optimizes the trap filter selection for NTSC and PAL
I
2
C register address 0Eh = Chrominance processing control 2 register
I
2
C data 04h = Optimizes the chrominance filter selection for NTSC and PAL
I
2
C register address 33h = Output formatter 1 register
I
2
C data 43h = Selects the 10-bit 4:2:2 output format
I
2
C register address 34h = Output formatter 2 register
I
2
C data 11h = Enables YCbCr output and the clock output
I
2
C register address 36h = Output formatter 4 register
I
2
C data AFh = Enables HS and VS sync outputs