Datasheet

SLLU139–February 2011
SPI
The TUSB9261 supports a SPI interface connected to a SPI flash device. The flash device is used to hold
the firmware for the TUSB9261.
For normal SPI operation a jumper on J13 must be populated. For reprogramming of the SPI flash device
it may be necessary to temporally remove J13. Refer to the TUSB9260 Flash Burner User Guide
(SLLU125) for more information about programming the SPI flash.
11
SLLU139–February 2011 SPI
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated