Datasheet

TUSB9260
SLLS962D– DECEMBER 2009–REVISED MAY 2011 www.ti.com
Table 4-4. USB Interface Signals
TERMINAL
I/O DESCRIPTION
PIN
NAME
NO.
USB_SSTXP 43 O USB SuperSpeed transmitter differential pair (positive)
USB_SSTXM 42 O USB SuperSpeed transmitter differential pair (negative)
USB_SSRXP 46 I USB SuperSpeed receiver differential pair (positive)
USB_SSRXM 45 I USB SuperSpeed receiver differential pair (negative)
USB_DP 36 I/O USB High-speed differential transceiver (positive)
USB_DM 35 I/O USB High-speed differential transceiver (negative)
USB_VBUS 33 I USB bus power
USB_R1 39 O Precision resistor reference. A 10-kΩ ±1% resistor should be connected between R1 and R1RTN.
USB_R1RTN 40 I Precision resistor reference return
Table 4-5. Serial Peripheral Interface (SPI) Signals
TERMINAL
I/O DESCRIPTION
PIN
NAME
NO.
O
SPI_SCLK 17 SPI clock
PU
I
SPI_DATA_IN 18 SPI master data in
PU
O
SPI_DATA_OUT 20 SPI master data out
PU
O
SPI_CS0 21 Primary SPI chip select for Flash RAM
PU
SPI_CS2/
I/O SPCI chip select for additional peripherals. When not used for SPI chip select this pin may be
23
PU used as general purpose I/O.
GPIO11
SPI_CS1/
I/O SPCI chip select for additional peripherals. When not used for SPI chip select this pin may be
22
PU used as general purpose I/O.
GPIO10
12 SIGNAL DESCRIPTIONS Copyright © 2009–2011, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TUSB9260