Datasheet

TUSB1310A

SLLSE32E –NOVEMBER 2010–REVISED JULY 2012

www.ti.com

USB 3.0 Transceiver

Check for Samples: TUSB1310A

1 PRODUCT OVERVIEW

1.1 Features

• Universal Serial Bus (USB)

– Single Port 5.0-Gbps USB 3.0 Physical Layer Transceiver

• One 5.0-Gbps SuperSpeed Connection

• One 480-Mbps HS/FS/LS Connection

– Fully Compliant with USB 3.0 Specification, Revision 1.0

– Supports 3+ Meters USB 3.0 Cable Length

– Fully Adaptive Equalizer to Optimize Receiver Sensitivity

– PIPE to Link Layer Controller

• Supports 16-Bit SDR Mode at 250 MHz

• Compliant With PHY Interface for the USB Architectures (PIPE), Version 3.0

– ULPI to Link Layer Controller

• Supports 8-Bit SDR Mode at 60 MHz

• Supports Synchronous Mode and Low Power Mode

• Compliant with UTMI+ Low Pin Interface (ULPI) Specification, Revision 1.1

• General Features

– IEEE 1149.1 JTAG Support

– IEEE 1149.6 JTAG support for the SuperSpeed Port

– Operates on a Single Reference Clock of 40 MHz

– 3.3-, 1.8-, and 1.1-V Supply Voltages

– 1.8-V PIPE and ULPI I/O

– Available in Lead-Free 175-Ball 12- x 12-nF BGA Package (175ZAY)

1.2 Target Applications

• Surveillance Cameras

• Multimedia Handset

• Smartphone

• Digital Still Camera

• Portable Media Player

• Personal Navigation Device

• Audio Dock

• Video IP Phone

• Wireless IP Phone

• Software Defined Radio

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to

specifications per the terms of the Texas Instruments standard warranty. Production

processing does not necessarily include testing of all parameters.