Datasheet
90.9 k ±1%W
10 k ±1%W
90.9 k ±1%W
10 k ±1%W
TUSB1310A
SLLSE32E –NOVEMBER 2010–REVISED JULY 2012
www.ti.com
Figure 5-2. USB Standard-A Connector Pin Connection
Figure 5-3. USB Standard-B Connector Pin Connection
5.1.2 Clock Connections
The TUSB1310A supports an external oscillator source or a crystal unit. If a clock is provided to XI instead
of a crystal, XO is left open. Otherwise, if a crystal is used, the connection needs to follow the guidelines
below.
Since XI and XO are coupled to other leads and supplies on the PCB, it is important to keep them as short
as possible and away from any switching leads. It is also recommended to minimize the capacitance
between XI and XO. This can be accomplished by connecting the VSSOSC lead to the two external
capacitors CL1 and CL2 and shielding them with the clean ground lines. The VSSOSC should not be
connected to PCB ground.
28 DESIGN GUIDELINES Copyright © 2010–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TUSB1310A