Datasheet

TUSB1210
www.ti.com SLLSE09F –NOVEMBER 2009–REVISED AUGUST 2012
BITS FIELD NAME DESCRIPTION TYPE RESET
2 CARKITMODE Changes the ULPI interface to UART interface. The PHY automatically clear RW 0
this field when UART mode is exited.
0b: UART disabled.
1b: Enable serial UART mode.
1 FSLSSERIALMODE_3PI Changes the ULPI interface to 3-pin Serial. RW 0
N
The PHY must automatically clear this field when serial mode is exited.
0b: FS/LS packets are sent using parallel interface
1b: FS/LS packets are sent using 4-pin serial interface
0 FSLSSERIALMODE_6PI Changes the ULPI interface to 6-pin Serial. RW 0
N
The PHY must automatically clear this field when serial mode is exited.
0b: FS/LS packets are sent using parallel interface
1b: FS/LS packets are sent using 6-pin serial interface
9.1.9 IFC_CTRL_SET
ADDRESS OFFSET 0x08
PHYSICAL ADDRESS 0x08 INSTANCE USB_SCUSB
DESCRIPTION This register doesn't physically exist.
It is the same as the ifc_ctrl register with read/set-only property (write '1' to set
a particular bit, a write '0' has no-action).
TYPE RW
WRITE LATENCY
7 6 5 4 3 2 1 0
CARKITMODE
AUTORESUME
CLOCKSUSPENDM
INDICATORPASSTHRU
FSLSSERIALMODE_6PIN
FSLSSERIALMODE_3PIN
INDICATORCOMPLEMENT
INTERFACE_PROTECT_DISABLE
BITS FIELD NAME DESCRIPTION TYPE RESET
7 INTERFACE_PROTECT_DISABLE RW 0
6 INDICATORPASSTHRU RW 0
5 INDICATORCOMPLEMENT RW 0
4 AUTORESUME RW 1
3 CLOCKSUSPENDM RW 0
2 CARKITMODE RW 0
1 FSLSSERIALMODE_3PIN RW 0
0 FSLSSERIALMODE_6PIN R 0
Copyright © 2009–2012, Texas Instruments Incorporated Register Map 33
Submit Documentation Feedback
Product Folder Links: TUSB1210