Datasheet

Software Control

www.ti.com

Table 3. LMK04800 Output Tab Description (continued)

Section Description

Clock Out 8 and 9 Configure Clock Out 8 and 9 outputs. Enable the outputs and set the divider, delay, and output buffer. Also

select the source for the output.

Clock Out 10 and 11 Configure Clock Out 10 and 11 outputs. Enable the outputs and set the divider, delay, and output buffer.

2.2.3 LMK04800 Advanced

After clicking on the LMK04800 Advanced tab, the display looks as shown in Figure 4.

Figure 4. LMK04800 Advanced Tab

Table 4. LMK04800 Advanced Tab Description

Section Description

SYNC Enable and configure the sync functionality.

DAC Vtune Rail Detection Enable and control the internal DAC settings.

Status Pins Setup Setup the status pins for various outputs as well as control some miscellaneous functions.

Holdover Mode Enable and configure holdover mode.

See the LMK04800 Family Data Sheet (http://www.ti.com/product/lmk04800) for a much more detailed

explanation of all of the internal registers and operation of the device.

TSW4806EVM SLAU454–July 2012

Submit Documentation Feedback