Datasheet

5.2 Software Boxes
Software Introduction www.ti.com
Table 1. Software Main Settings (continued)
Setting Top Panel Bottom Panel
Register Config DAC5682Z register settings CDCM7005 register settings
TSW3100 Config DAC5682Z register settings TSW3100 settings
Help DAC5682Z register settings DAC5682Z data path and help window
The DAC5682Z software interface controls are divided into boxes. The functionality of these boxes is
described in Table 2 .
Table 2. Software Box Descriptions
Box Description
Menu Switch between main functionality settings.
Home Show serial information and EVM status.
USB/Readback Reset the USB port to begin a new data session. Disable DAC5682Z read capabilities
(simulation mode).
DAC5682Z Register Table Show the DAC5682Z register settings in binary and hex formats.
DAC5682Z Register Configuration Read/Write DAC5682Z register configuration.
CDCM7005 Register Configuration Write CDCM7005 register configuration (no read capability).
DAC5682Z Diagram Graphical representation of the DAC5682Z data path under current register configuration.
TSW3100 Configuration Control a TSW3100 pattern generation system – refer to TSW3100 users guide for more
information
Help Display information on the DAC5682Z register configuration box controls.
A diagram of each of these Menu choices is shown in the following illustrations.
Figure 3. Home Menu Showing EVM Status
10 TSW3070EVM: Amplifier Interface to Current Sink DAC - Arbitrary Waveform Generator Demonstration SLWU055 – May 2008
Submit Documentation Feedback