Datasheet

Program Description
3-9
Operation
3.4 Program Description
After installing the software for the TSC2301EVM as described in Section 2.3,
you may begin using it to evaluate and develop with the TSC2301.
3.4.1 Human Interface Screen
The program’s interface is a simple, five-tab interface. Clicking on a tab takes
you to the functions associated with that tab. The program begins on the
Human Interface tab , the default as shown in Figure 3-1.
Figure 3-1. Human Interface Screen
This screen reflects the touch screen and keypad inputs from the
TSC2301EVM. The status bar on the bottom of the screen is divided into four
sections, and shows the status of communication between the PC and the
EVM. Starting from the left, the first section shows the status of the connection;
if an error in communication occurs, an error message appears here,
otherwise it looks as shown in Figure 3-1. The final section, on the right side
of the status bar, shows the number of readings per second being taken from
the touch screen. This value drops to zero when no screen touch is detected.