Datasheet

www.ti.com
Program Description
The X and Y, or X, Y, and Z mode is selected by clicking on the option at the A/D Mode Selection Box.
The touch action is shown on the screen in dot mode, as shown in Figure 3 , or solid line mode as shown
in Figure 4 . The dot line mode is selected by the corresponding option above the drawing screen.
Figure 4. Human Interface Screen (Line Mode)
The display can be cleared by pressing Enter on the PC keyboard.
The window to the right of the screen shows the touch screen data when the TSC2111 is in buffer mode.
For the details on the buffer mode, refer to the TSC2111 datasheet and the next section Data Acquisition
Screen.
SLAU178 – April 2006 TSC2111EVM and TSC2111EVM-PDK 9
Submit Documentation Feedback