Datasheet

Program Description
3-28
3.5.4.8 Cell-Phone Section
The cell-phone section is used to set up the cell-phone input gain, by using the
CP_IN PGA or AGC.
When the checkbox by Cell Phone Input AGC ON, is not checked, the PGA
controls the gain, from −34.5 dB to 12 dB, and in 0.5 dB steps if the
soft-stepping option was selected. The cell-phone input is muted when the
Mute box under the slider is checked.
When the box by AGC ON is checked, the cell-phone input AGC is enabled,
as shown in Figure 3−15. Refer to the TSC 2101 data sheet for setting and
using the AGC.
Figure 3−15. Audio 2 Screen With Cell-Phone AGC On