Datasheet

Program Description
3-16
Figure 3−6. Reading Content List Screen
With this EVM, the buffer trigger level is either 8 or 16, selected by the Buffer
Trigger Level selection slide. Even though the TSC2101 can be set to a higher
trigger level up to 64, this EVM allows only 8 or 16. The buffer function can be
controlled in either Continuous or Single Shot mode, which is selected on the
mode control option box. Refer to the data sheet for more on TSC2101 buffer
function.
The data in the list is cleared by clicking on the Clear List button on this screen.
3.5.2.3 Register Readings
Five additional register reading buttons trigger the lead corresponding
registers and move the raw data into the list. This is helpful for testing and
debugging.
3.5.3 Configuration Screen
This screen accesses all the configurable settings for the TSC2101 A/C
converter and reference as shown in Figure 3−7.