Datasheet

Program Description
3-17
Operation
3.5.3.4 Reinitialization and Reset
There are two buttons on this screen that allow the user to reset and reinitialize
the TSC2100 by clicking these buttons.
By clicking the button
SW Reset , a software reset is issued. By clicking the
button
Int TSC2100 , the control registers (for ADC and audio) revert back
to the startup (firmware) default settings.
To bring the TSC2100 EVM back to its powerup status, you can clicking
SW Reset and followed by Int TSC2100 .
3.5.4 Audio Screen
The audio functions of the TSC2100 can be accessed using the Audio screen
(besides the programmable PLL which is on the configuration screen) as
shown in Figure 3−8.
Figure 3−8. Audio Screen