Datasheet

EVM Bill of Materials

www.ti.com

7 EVM Bill of Materials

Table 7 and Table 8 contain a complete bill of materials for the modular TSC2008EVM evaluation board

and the USB-MODEVM interface board, respectively (included only in the TSC2008EVM-PDK).

Table 7. TSC2008EVM Bill of Materials

Qty Value Ref Des Description Vendor Part Number

1 100 R1 1/8W 5% Chip Resistor Panasonic ERJ-6GEYJ101V

2 2.7K R2, R3 1/10W 5% Chip Resistor Panasonic ERJ-6GEYJ272V

1 20K R4 1/10W 5% Chip Resistor Panasonic ERJ-6GEYJ203V

1 0.1μF C1 25V Ceramic Chip Capacitor, ±10%, TDK C2012X7R1E104K

X7R

2 1μF C6, C7 16V Ceramic Chip Capacitor, ±10%, TDK C2012X7R1C105K

X7R

1 U1 Touch Screen Controller Texas Instruments TSC2008IRGV

1 U2 I

C 64K EEPROM, 1.8–5.5V Microchip 24AA64-I/SN

2 J1A, J2A 20 Pin SMT Plug Samtec TSM-110-01-L-DV-P

1 J3A 10 Pin SMT Plug Samtec TSM-105-01-L-DV-P

2 J1B, J2B 20 pin SMT Socket Samtec SSW-110-22-F-D-VS-K

1 J3B 10 pin SMT Socket Samtec SSW-105-22-F-D-VS-K

1 N/A TSC2008 EVM PWB Texas Instruments 6495737

1 JMP2 Terminal Strip, 2 pin (2×1) Samtec TSW-102-07-G-S

1 JMP1 Terminal Strip, 3 pin (3×1) Samtec TSW-103-07-G-S

2 TP6, TP12 Testpoint, Large-Loop Keystone Electronics 5011

10 Not TP1–TP5, TP7–TP11 Testpoint, Mini-Loop Keystone Electronics 5000

Installed

2 N/A Shorting Blocks Samtec SNT-100-BK-G-H

ATTENTION: All components should be RoHS compliant. Some part numbers may be either leaded or RoHS. Verify purchased

components are RoHS compliant.

TSC2008EVM and TSC2008EVM-PDK User's Guide SLAU248–May 2008

Submit Documentation Feedback